How to Clean 3D-Printed and Traditional Suppressors

Suppressors catch more than sound. Every shot sends hot, particulate-laden propellant gas through the can, and carbon, lead residue, and unburned powder settle into the baffles. Left alone, that fouling adds weight and eventually degrades both sound performance and the long-term integrity of the ...

By James Chen •

The Heated Gloves That Actually Hold Heat in the Field

Cold hands do more than hurt. They cost you the fine motor control you need to run a trigger, tie a knot, or handle a tool, and the deterioration compounds: removing a glove to regain feeling only speeds up hand cooling, which drops your dexterity further. A good pair of heated gloves breaks that...

By James Chen •

COG: Build the Echelon Your Way

I have been fortunate enough to spend a lot of time with the Springfield Armory Echelon platform since it was first introduced. From the original 4.5F full-size pistol through the 4.0C compact, compensated and other configurations (such as the 4.0FC) that followed, I have reviewed and experimente...

By Scott Conditt •

TFB Review: ATN ThOR 6 Mini 384 3.5-28x Thermal Scope

I love a thermal that can pull double duty as a riflescope or a handheld, and the  ATN ThOR 6 Mini 384 3.5-28x  is built small enough to do both. ATN packs a 384x288 sensor and a 35 mm lens into a scope that measures 7.48 inches and weighs 1.19 pounds. Its minimum advertised price (MAP)...

By TFB Staff •

The Rimfire Report: FarrowTech's FT17 PDW Kit (First Impressions)

Last time I talked about FarrowTech, we took a look at his Ruger Mark IV 22R PDW Kit  back in August. My only real complaint about the Mark IV chassis upgrade had nothing to do with the build itself, but with how far behind the Mark IV is in modern 22LR pistol development. The Ruger Mark ser...

By Luke C. •

Savage Arms Adds the REVEL Tactical to Its Rimfire Lever Lineup

When the REVEL first showed up in September 2024, it was a walnut-stocked, takedown rimfire lever gun in two flavors, the REVEL Classic and the REVEL DLX. Two years later, Savage Arms is adding a third model that trades the walnut for an MDT stock, a factory Picatinny rail, and a threaded muzzle....

By Sam.S •

POTD: Remington-Hepburn No. 3 – A Creedmoor Shooter’s Falling Block

Welcome to today’s Photo of the Day! Here we have an early example of one of Remington’s best single shots. This is a Remington-Hepburn No. 3 falling block rifle in 45-70 Government, made around 1883 and wearing a two-digit serial number. The action came from Lewis Hepburn, who ran Re...

By Sam.S •

Three Mule Deer Hunts That Taught Me the Hard Way

Every hunter remembers the bucks they tagged. But the hunts that teach the most are usually the ones that fall apart. Michael “Micky” Luby puts it plainly: the hunts he botched outright shaped him far more than the successful ones ever did. Steven Rinella made a similar point when he ...

By James Chen •

Modular Box Blind Field Test: Does Orion’s 68VT Deliver?

A modular hunting blind costs far more than a pop-up, so the real question is whether the comfort, durability, and silence justify the jump. After Amanda Oliver ran the Orion 68VT through actual use, the verdict came down to how you hunt and how long you plan to leave a blind in the woods. If [&#...

By James Chen •
Older Posts »